| Member modules A-H | Member modules I-Z | Club
modules |
| Dan & Debbie
Brown Dan & Debbie have built two 4 ft modules. These modules follow standard Ntrak alignment and can be used together or separately. One module has a logging theme.
|
![]() |
| While the other module has a round house and an industrial theme. When used together these modules have a separate private loop that passes through the modules then goes behind the sky boards. |
![]() |
| Don & Carol
Carney This was one of the original lightweight module sets built in 1993. It's 6 ft, has a standard Ntrak alignment, and follow a farming theme that is intended to represent the Salinas Valley. It's been in many layouts including 3 large National Train Show Ntrak layouts. |
![]() |
| Nick Frischhertz These modules were originally built by Bill Settle. When Bill could no longer transport the 10 ft set of 3 sections Nick purchased them. These modules also feature NCat operation. |
![]() |
| Joe Giacomini Joe has had this module for several years and keeps improving it. It's an 8ft light weight module pair with the standard blue alignment plus has a mountain division track. While the scenery theme is mountains and country, there is also quite a few structures and details. |
![]() |
| Robin Gilstrom Robin has four 4 ft modules that can be used as a straight 16 ft or, with 8ft on each side of a club corner. |
![]() |
| With both arrangements there is another circuit of track which is run over live trolley wire with locomotives picking up power from an pantograph. This sub group of Ntrak is called NCat. Robins modules have one of the largest NCat operations in the United States. | ![]() |
| Dan Hobbs Dan is our circus and carnival modeler, and animation expert. The modules are 2 standard 4 footers with standard track alignments. Almost all the rides are motorized and these modules are well populated with N scale people. |
![]() |
| Member modules A-H | Member modules I-Z | Club modules |











